Small Airships E13 and Blimps for SALE

Home Products Flying Airships Small Airships E13 and Blimps for SALE

Small Airship – E13

We computer design and simulate your airship prior to manufacture.  The designs for airships are state of the art, which provides the customer with a guaranteed performance level that far surpasses any of the competition.  Our airships perform and have an unblemished safety record.

indoor blimp thrifty e17
e13 blimp
Blimp Advertising Balloon e13

The 13ft Airship is the world’s smallest outdoor flying airship, it is also one of the highest performing.

The E13 can be transported in a suitcase to an event or photo shoot. However, if you wish to transport it inflated a 13ft Airship would fit into a small enclosed trailer or the back of a Mercedes Sprinter type van which enables you to fly within seconds of arrival at a venue.

As with all our flying airships the E13 can be tethered, by removing the motors and attaching the tether harness.

The E13 can operate with a camera gimbal to get the ultimate photographs of a venue or event.

ikea
AIRSHIP SOLUTIONS airship.com.au

Very Simple to fly – The airship can be purchased with or without engines. If you are simply interested in photographs, you can start with the tethered version and attached the motor unit at a later stage.

 

Simple to operate and setup – From the trunk of a car, the hull (which is secured) is inflated. The 13ft airship’s gondola, fins and batteries velcro into place. The fins ropes are attached, power cables and servo wires are connected. You are then ready to fly.

 

Easy to transport, once flown, and the helium is released. The airship can deconstruct into the space of a suitcase.

Windspeed – They handle a wind of 10knts comfortably, or 15knts(30km/hr) with an experienced operator.

 

Small Payload – Payloads of up to one pound are possible. The payload can be used for increased endurances, aerial photography from small high resolutions cameras, video cameras, release mechanisms or advertising banners.

 

High Operational Time – fly for 20 minutes, change battery (20 seconds) and continue to fly. The airship has the capability of flying for 57 minutes in every hour, assuming the operator has the stamina. Multiple batteries are required.

Configured for Indoor OR Outdoor Use – Can be configured for indoor or outdoor use, by applying the indoor gondola, and indoor fins to the airship, it can be the hit at tradeshows, concerts, shopping malls, sporting events, the list is endless. The indoor application uses lower voltage motors/batteries and an engine unit that has 360 degree rotation for precise control. The moving fins (for outdoor configuration) are substituted for a thruster in the rear lower fin for turning on the spot.

E13 Professional Prices

$5800 Outdoor Version

Professional Version.

 

  • E13 Blimp with ABS Gondola with Brushless motors
  • Fins white choice of colour 40 to chose from
  • Hull with three standard colours or combination of 3 standard colours. Any PMS can be matched for non-standard at a cost.
  • 7Ch Standard Remote Control
  • AC/DC Digital Battery Charger
  • 5s1p Lithium Polymer Batteries
  • Hull Repair Kit
  • Fins with Rudders and Elevators

$5000 Indoor Version

Professional version.

 

  • E13 Blimp with ABS Gondola with Brushless Motors
  • Fins white choice of colour 40 to chose from
  • Hull with three standard colours or combination of 3 standard colours. Any PMS can be matched for non-standard at a cost.
  • 6Ch Standard Remote Control
  • AC/DC Digital Battery Charger
  • 2s1p Lithium Polymer Batteries
  • HullRepair Kit
  • Fins with lower fin rear thruster

$7000 Indoor/Outdoor

Professional version – Includes both sets of running gear, Indoor and Outdoor.

 

  • E13 Blimp with both Indoor and Outdoor Gondola
  • Fins with choice of colour 40 to chose from for both Indoor and Outdoor Blimps
  • Hull with three standard colours or combination of 3 standard colours. Any PMS can be matched for non-standard at a cost.
  • 7Ch Standard Remote Control
  • AC/DC Digital Battery Charger
  • 5s1p and 2s1p Lithium Polymer Batteries
  • HullRepair Kit
  • Fins with lower fin rear thruster
  • Fins with Rudders and Elevators

Pictured above: E13 Optional Travel case. Case type might vary based on region.

 

Included: Transmitter Case, Hull and protective bag, Helium Inflation hose, fin protection through seperators, Gondola section.

The E13has been developed and refined over 5 years to satisfy the markets need for a small, simple outdoor flying electric airship.

The E13 is fully configurable it can operate as follows

  • Motorised Blimp
  • Aerial Photograph Motorised Blimp
  • Tethered Blimp
  • Aerial Photography Tethered Blimp
  • Indoor Blimp (Optional Indoor Engine and Fin Unit)

 

The E13 can be purchased with a fin-set for outdoor flying, or indoor flying, and a complementary engine unit for indoor or outdoor flying.

arrow_bullet Length 4.0 meters/ 13ft
arrow_bullet Height 1.5 meters / 5ft
arrow_bullet Banner Size 2.0 x 0.8 meters / 6.5ft x 2.5 ft
arrow_bullet Carrying Capacity 0.75 Kg / 1.5lbs
arrow_bullet Weight 0 Kg

Flying Blimp at Indoor Events